Tuning the Electronic Control Unit (ECU) in Car Mechanic Simulator 2021 can initially appear as a perplexing and random process. However, there’s a distinct, step-by-step method to effectively tune your ECUs and achieve the coveted “Perfect Ratio”. This guide will illuminate the process, providing a clear pathway to optimize engine performance through ECU tuning in CMS 2021. Follow these steps to master ECU tuning and unlock your engine’s full potential.
Step-by-Step ECU Tuning Guide
This section breaks down the ECU tuning process into manageable steps, ensuring you can easily follow along and apply these techniques in Car Mechanic Simulator 2021.
Step 1: Leveling the First Two Bars
Begin your ECU tuning journey by focusing on the first two bars in the tuning interface. Your initial objective is to bring these two bars to the same height. To do this, identify the shorter bar and use the “+” button located beneath it. Click the “+” button incrementally until this bar reaches the exact height of the other bar. Achieving equal height for the first two bars is crucial for progressing to the next stage of ECU tuning.
Step 2: Aligning Three Bars
With the first two bars now perfectly aligned, shift your attention to the remaining two bars. Select one of these unaligned bars and, similar to Step 1, use its “+” button to increase its height. Continue clicking until this chosen bar ascends to match the height of the already aligned pair. Patience is key here, as it might require several clicks to precisely synchronize the third bar with the initial pair. Upon successful alignment, you will observe three bars standing at an identical height.
Step 3: Perfecting All Four Bars
Having successfully aligned three bars, you are now one step away from achieving complete synchronization. Focus on the single bar that remains misaligned. Employ the same technique as before: utilize the “+” button beneath this bar to elevate it until it perfectly matches the height of the other three. This step might necessitate a few clicks to achieve pixel-perfect alignment. Completing this step signifies that all four bars are now at the same height, a critical milestone in the ECU tuning process.
Step 4: Reaching 18% and Perfect Ratio
With all four bars uniformly leveled, the final step involves raising all bars in unison to reach the optimal tuning point. Click the “+” button under each of the four bars once. This action will incrementally raise all bars while maintaining their equal height. Repeat this process of clicking “+” on each bar, one click at a time, until you observe the tuning percentage reach 18% and the display indicates “Perfect Ratio”. This signifies the ECU is optimally tuned, maximizing engine performance within Car Mechanic Simulator 2021.
By following these steps, you can confidently navigate the ECU tuning process in Car Mechanic Simulator 2021 and consistently achieve a “Perfect Ratio”, enhancing your vehicle’s performance and your overall gameplay experience.
